Labs / MicroPython module projects

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

Author: Li Zisheng · Source: FreakStudio open documentation · License: CC BY 4.0

Contents

Project Description

1. Introduction

1.1 Project Background

Traditional signal acquisition devices mostly feature fixed displays or single functions, lacking real-time waveform display and visualization capabilities. This project is based on the GraftPort-RP2040 development board, and combines an analog-to-digital conversion module based on the ADS1115 chip with a 0.96-inch SSD1306-OLED module to implement an integrated system of "signal acquisition - waveform display - real-time visualization", which integrates the lightweight task scheduling and exception handling mechanism of MicroPython to ensure the stable operation of the system.

1.2 Overview of the Main Functions of the Project

This project is developed based on MicroPython, whose core function is to collect analog signals in real time via the ADS1115 analog-to-digital converter module, convert them into digital waveforms, and display the waveform diagrams in real time on the OLED display screen; it supports on-board key interrupt to switch task start and stop, has built-in automatic garbage collection (GC) to avoid memory leaks, and is equipped with exception capture and rate-limited printing for convenient problem locating.

1.3 Applicable Scenarios or Application Area

2. Main Functions

3. Hardware Requirements

3.1 Hardware Required

The project is based on the GraftPort-RP2040 development board as the main controller:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

The other required modules include:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

3.2 Hardware Connection

Based on the ADS1115 analog-to-digital converter module: connected via PH2.0 connection cable to the I2C0 interface;

0.96-inch SSD1306-OLED module: connected via PH2.0 connecting cable to I2C1 interface;

Lithium Battery Charge and Discharge Module: BAT interface connects to the lithium battery, and the OUT interface supplies power to the main control board via a PH2.0-2P connection cable.

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)
High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)
High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

3.3 Structural Assembly

First, use M3 plastic pillars to fix each module and the main control board to the bottom plate of the housing (M3 screw holes are pre-drilled on both the main control board and the housing):

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)
High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

Next, secure the periphery of the housing with M3 plastic pillars, then screw in M3 screws at the corresponding positions to complete the assembly:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

3.4 Notes

When the main control board is not connected to an external watchdog module, the RUN DIP switch 2 must be turned on:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

The lithium battery charge-discharge module supports power level display, and can be charged via the Type-C interface below:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

4. Software Environment

5. File Structure

signal_waveform_acquisition
├─ LICENSE
├─ tools
│  ├─ dependency_analyzer.py
│  ├─ mpy_compiler.py
│  ├─ mpy_uploader.py
│  └─ README.md
├─ firmware
│  ├─ board.py
│  ├─ boot.py
│  ├─ conf.py
│  ├─ main.py
│  ├─ tasks
│  │  ├─ ads_task.py
│  │  ├─ maintenance.py
│  │  └─ __init__.py
│  ├─ libs
│  │  ├─ __init__.py
│  │  └─ scheduler
│  └─ drivers
│     ├─ __init__.py
│     ├─ pcf8574_driver
│     └─ ads1115_driver
├─ examples
├─ docs
└─ build
   └─ build_here

6. Description of Key Documents

7. Core Ideas of Software Design

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)
High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

8. Instructions for Use

8.1 Hardware Connection

Connect the main control board, each sensor module and the battery according to the connection method specified in the "hardware requirements";

8.2 Run the Project (Using PyCharm + MicroPython Plugin)

Open PyCharm and install the corresponding MicroPython plugin.

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

In the plugin, select Target Device (Target Device) as RP2040, and enable Auto-detect device path (Auto-detect device path).

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

Set Project/firmware as the project root directory.

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

Modify runtime configuration:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

Click the IDE green triangle button in the upper right corner to run, and you can start uploading the firmware and executing the project.

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

8.3 Modification of Running Configuration

You can configure conf.py to modify or add parameters as needed, for example:

# conf.py example configuration
I2C_INIT_MAX_ATTEMPTS = 3      # Maximum number of sensor initialization retries
I2C_INIT_RETRY_DELAY_S = 0.5   # Interval between retries (seconds)
ENABLE_DEBUG = True            # Whether to enable debug printing
AUTO_START = True              # Whether to run tasks automatically at startup

8.4 Functional Testing

Turn on the VBAT battery power switch located at the bottom of the main control board, and you will see the power indicator lights on both the main control board and the module light up:

When conf.py is configured unchanged and the hardware connection is normal, the program can run properly.

The terminal output is as follows:

High-Precision Waveform Acquisition Device (Based on GraftPort-RP2040 Development Board)(Open Version)

8.5 Debugging and Troubleshooting

9. Sample Program

There are no other reference sample codes for this project, you can directly make modifications in the firmware folder.

10. Notes

11. Version Record

12. Contact the Developer

If you have any questions or need assistance, please contact the developer via the following channels:
📧 Email: 10696531183@qq.com
💻 GitHub: https://github.com/FreakStudioCN

13. Licensing Agreement

In this project, except for machine and other MicroPython official modules (MIT License), all driver and extension codes written by the author are released under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) Licensing Agreement.

You are free to:

Only the following conditions shall be complied with:

Copyright © FreakStudio. All rights reserved.

Appendix 1: Project Source Code Download

https://github.com/FreakStudioCN/GraftPort_MicroPython_Labs/tree/main/signal_waveform_acquisition

Appendix II: Reference Materials for hardware Modules

GraftSense - Based on ADS1115 Analog-to-Digital Converter Module

GraftSense 0.96-inch SSD1306 OLED Module

GraftSense-SY7656 Lithium Battery Charge-Discharge Module

GraftPort - Raspberry Pi Pico Expansion Board (Open Edition Template Files)

Version Record

Document Version

Date of Revision

Modifier

Revised Content

V1.0.0

2025-11-03

Hou Junhan

Draft the initial version of the document.

V1.1.0

2026-01-04

Li Zisheng

Final version.