Contents
Introduction to Knowledge Base
Welcome to the Knowledge Base of the "Minyuan Sensing Module MicroPython Driver Library"! Here we have compiled for you the complete driver code, wiring instructions, testing guides and pitfalls avoidance manual for Minyuan series capacitive sensors, helping you quickly integrate these non-contact sensors into your MicroPython projects and save the trouble of studying manuals and writing drivers from scratch.
🛠️ What's included in each document?
- Module introduction and function description to help you quickly determine whether it is suitable for your project
- Complete pin definitions and hardware connection guide to avoid board damage caused by incorrect wiring
- MicroPython drivers and sample code that can be directly copied and used
- Rapid Test Procedures for Maker Edition: Verify Sensor Functions with Simple Tools
- Key usage precautions, such as tips to avoid pitfalls regarding waterproofing, installation, power supply and calibration
🚀 Quick Start in 3 Steps
- Locate the sensor module you need in the left-side directory
- Please read the "Module Usage Instructions" first to learn about the wiring and key precautions
- Copy the sample code from the "Driver" section, flash it to your development board, and follow the steps in the "Application Experiment" to quickly verify the functionality
💡 Quick Tip for Makers
All these capacitive sensors feature the advantage of non-contact detection, however, the mounting method, power supply voltage and environmental interference will all affect the reading accuracy. Be sure to read the "Key Precautions" first before starting the wiring work!