Industrial electronics and test equipment.

Driver and controller boards, embedded control, rugged electromechanical systems and the tests that prove them. We design the board, write the control firmware, build and test it, and support the small batch.

Problems we are asked to solve

  • A motor, pump or actuator needs its own driver or controller board
  • An existing controller has to be redesigned, made smaller or made to survive the site
  • A device has to pass the same tests on each build before it ships
  • Several suppliers each own one part of a machine and nobody owns the whole

What Anvol does

  • Driver, controller and power boards, schematic to assembled PCBA
  • Embedded control firmware, field links and remote monitoring
  • Mechanical integration of the electronics into the machine
  • Functional test procedures, and a test fixture when the quantity justifies one
  • Small-batch production support

What to send first

  • What the device has to drive, sense or control
  • The site: power, temperature, vibration, connectivity
  • Existing boards, drawings or the machine it fits into
  • Quantities and the tests each unit must pass

A full specification is not needed to start.

How the work is phased

  1. Requirement and interface review
  2. Prototype board and firmware, bench-tested
  3. Integration and tests in the machine
  4. Small batch, tested to the agreed test plan

Limits

We have not yet shipped a production-line test fixture as a client project; fixtures are quoted per project after a review. No safety or EMC certification is included.

Next step

Send a short description and whatever files or photos you have; we reply within 12 hours with questions or a suggested first step. Related: Testing, quality & documentation service.

Projects in this field

All industries · All builds →

Send what you have, even if it is only a sketch.

Discuss your project

Or get a manufacturing quote · book a 30-minute call