Stepper Motor Driver Board

Reference figures from Anvol's engineers for a similar build: development $6,000–14,000, estimated parts about $35–70 per unit at 100 units. A dedicated driver board for stepper motor control and system integration. Products that position something (a stage, a valve, a feeder, a camera) often need more channels, a different power input or a smaller board than a generic stepper driver gives, so the board is built around the motors and the product. We do the PCB design, build the boards and test them: functional tests, power tests, load tests, and motor testing and selection. The photos show small geared stepper motors driven from a battery-powered control board, white controller boards in a test setup, and a four-channel driver board with heatsinked driver modules, STEP/DIR headers and screw terminals.

  • Client type: Not published
  • Units: Not published
  • Development fee: $6,000–14,000
  • Parts per unit (estimate): about $35–70 per unit at 100 units
  • Stage: Built by our engineers; figures are a reference range for similar builds
Original case sheet: Stepper Motor Driver Board
Original case sheet

Overview and tech stack

Project type
PCB/PCBA & Product Integration
Motors
Stepper motors, from small geared steppers up
Board
Four-channel driver PCB with heatsinked driver modules, STEP/DIR headers and screw terminals
Power
Battery-powered or DC input
Testing
Functional, power, load and motor testing

What we built

  • PCB design
  • Manufacturing
  • Functional testing
  • Power testing
  • Load testing
  • Motor testing and selection

What this tech stack can also build

  • Custom stepper driver board
  • Multi-axis stepper controller for a small machine
  • Camera slider or turntable controller
  • Lab automation and syringe pump drive
  • Valve or damper positioning controller
  • Feeder and dispenser motor control
  • Pen plotter or laser engraver motion board
  • Linear stage controller
  • Smart curtain or blind motor driver
  • Battery-powered stepper controller
  • Educational motion control kit
  • Stepper motor selection and load testing

Commercial reference

Development time
30–45 days (reference)
Development fee
USD 6,000–14,000 depending on channel count and complexity (reference range)
Estimated BOM + assembly
about USD 35–70 per four-channel board at 100 units (engineer estimate; motors not included)
Not included
Certification such as FCC/CE (quoted separately); shipping and import duties

Reference figures from our engineers for a similar build. Not a past invoice and not a fixed quote; a written quote follows a review of your files.

What to confirm before we quote

  • Channel count: how many steppers one board drives, such as the four-channel layout shown
  • Motor details: frame size, rated current and voltage, and whether it is geared
  • Motion needs: speed, torque, microstepping and any limit switch or homing inputs
  • Power input: battery or DC supply, voltage, and heat limits that decide heatsinking
  • Control input: STEP/DIR from your controller, or an onboard MCU running the motion

Start a similar project

  1. Send what you have: sketches, a reference product, files or a written idea.
  2. We review it and list the gaps and open questions.
  3. You get a written scope and quote.
Original case sheet: Stepper Motor Driver Board

All builds →

Building something similar?

Get a free project review

Or book a 30-minute call