Servo Motor Driver and Bus Servo Driver

Reference figures from Anvol's engineers for a similar build: development $6,000–14,000, estimated parts about $25–50 per unit at 100 units. Custom control electronics for products that move with servos: boards that drive many PWM hobby servos at once, and drivers for serial bus servos that are daisy-chained on one cable and addressed by ID. We do the PCB design, build the boards and test them: functional tests, power tests, load tests, and servo testing and selection so the servo and the driver fit the load. The photos show an ESP32 six-channel servo board, a 4-DOF arm driven by servos, and a chain of bus servos running from a battery pack through a power board and a small controller.

  • Client type: Not published
  • Units: Not published
  • Development fee: $6,000–14,000
  • Parts per unit (estimate): about $25–50 per unit at 100 units
  • Stage: Built by our engineers; figures are a reference range for similar builds
Original case sheet: Servo Motor Driver and Bus Servo Driver
Original case sheet

Overview and tech stack

Project type
PCB/PCBA & Product Integration
Servos
Multi-channel PWM servos and serial bus servos
Controller
ESP32-based servo boards
Power
Battery pack with a separate servo power board
Testing
Functional, power, load and servo testing

What we built

  • PCB design
  • Manufacturing
  • Functional testing
  • Power testing
  • Load testing
  • Servo testing and selection

What this tech stack can also build

  • Bus servo driver board
  • Multi-channel servo controller for a robot arm
  • Servo board for a hexapod or quadruped robot
  • Animatronic figure controller
  • Camera pan-tilt servo controller
  • Servo driver for an educational robot kit
  • Desktop robot arm controller
  • Humanoid robot servo bus board
  • Servo-driven display or kinetic art piece
  • Wireless (ESP32) servo control board
  • Servo power distribution board
  • Servo selection and load testing for a new mechanism

Commercial reference

Development time
30–45 days (reference)
Development fee
USD 6,000–14,000 depending on channel count and complexity (reference range)
Estimated BOM + assembly
about USD 25–50 per board at 100 units (engineer estimate; servos and battery not included)
Not included
Certification such as FCC/CE (quoted separately); shipping and import duties

Reference figures from our engineers for a similar build. Not a past invoice and not a fixed quote; a written quote follows a review of your files.

What to confirm before we quote

  • Servo type: PWM hobby servos, serial bus servos, or both, and the servo model if chosen
  • Channel count: how many servos move at once, and how many per daisy chain for bus servos
  • Load and torque: what each joint must lift or hold, and the speed you need
  • Power: battery pack voltage, and peak current when several servos move together
  • Control: ESP32 or another controller, wireless or wired link, and feedback needed such as position or temperature

Start a similar project

  1. Send what you have: sketches, a reference product, files or a written idea.
  2. We review it and list the gaps and open questions.
  3. You get a written scope and quote.

All builds →

Building something similar?

Get a free project review

Or book a 30-minute call