Power supply PCB design

Reference figures from Anvol's engineers for a similar build: development $1,200–8,000, estimated parts about $15–40 per unit at 100 units. Power supply boards designed for the product they sit in. We design high-power supplies from over 100 W up to kilowatt level, low-noise and low-ripple supplies for analog, sensor and audio circuits, DC supplies (buck, boost, multi-output), AC supplies (AC-DC, PFC, isolated) and ultra-compact, high power-density modules. Each job covers the schematic and design documents, the PCB layout with Gerber files, two prototype units and a load test with a written report.

  • Client type: Not published
  • Units: 2 prototypes
  • Development fee: $1,200–8,000
  • Parts per unit (estimate): about $15–40 per unit at 100 units
  • Stage: Built by our engineers; figures are a reference range for similar builds
Original case sheet: Power supply PCB design
Original case sheet

Overview and tech stack

Project type
PCB/PCBA & Product Integration
Power range
Over 100 W up to kW level; compact low-power modules
Topologies
Buck, boost, multi-output DC; AC-DC, PFC, isolated supplies
Low noise
Low-ripple supplies for analog, sensor and audio circuits
Validation
Load testing with a written report

What we built

  • Power supply schematic and design documents
  • PCB layout (Gerber files)
  • 2 prototype units
  • Load testing and report

What this tech stack can also build

  • Custom AC-DC power supply board
  • Custom DC-DC converter (buck, boost, multi-output)
  • High-power supply above 100 W for industrial equipment
  • Low-noise power supply for audio or sensors
  • Isolated power supply with PFC
  • USB-C power delivery board
  • Battery charging and power board
  • Compact power module for IoT and edge devices
  • Power board for drones and robots
  • Power supply for instruments and test equipment
  • Replacement power board for a legacy product
  • Power supply prototype with load test report

Commercial reference

Development time
about 3 weeks (reference)
Development fee
USD 1,200–8,000 depending on power level and complexity (reference range)
Estimated BOM + assembly
about USD 15–40 per board for compact DC-DC modules at 100 units (engineer estimate)
about USD 80–300 per board for 100 W to kW supplies at 100 units (engineer estimate)
Included
Schematic and design documents; PCB layout (Gerber); 2 prototypes; Load testing and report
Not included
Certification such as FCC/CE (quoted separately); shipping and import duties

Reference figures from our engineers for a similar build. Not a past invoice and not a fixed quote; a written quote follows a review of your files.

What to confirm before we quote

  • Input: AC or DC, voltage range and frequency
  • Output rails: voltages, currents and total power for each rail
  • Noise: ripple and noise limit, and which circuits it feeds such as analog, sensor or audio
  • Isolation and safety: isolated or not, PFC needed, and the safety standard you must meet
  • Size and cooling: board size limit, airflow or heatsink allowed, and operating temperature

Start a similar project

  1. Send what you have: sketches, a reference product, files or a written idea.
  2. We review it and list the gaps and open questions.
  3. You get a written scope and quote.

All builds →

Building something similar?

Get a free project review

Or book a 30-minute call