Multi-Channel DC Motor Driver and FOC Control Board

Reference figures from Anvol's engineers for a similar build: development $6,000–14,000, estimated parts about $40–90 per unit at 100 units. Custom driver and control boards for multi-motor systems: several brushed DC motors, or motors run under field-oriented control (FOC), from one controller. Off-the-shelf driver boards rarely match the channel count, connectors, power input and board shape of a new product, so the board is designed around the motors and the enclosure. We do the PCB design, build the boards, and test them: functional tests, power tests, load tests, and motor testing and selection so the motor and the driver are chosen together. The photos show boards driving several geared DC motors with encoders from one battery pack, single driver boards with screw terminals and a wireless MCU module, and stacked expansion boards linked by ribbon cables.

  • Client type: Not published
  • Units: Not published
  • Development fee: $6,000–14,000
  • Parts per unit (estimate): about $40–90 per unit at 100 units
  • Stage: Built by our engineers; figures are a reference range for similar builds
Original case sheet: Multi-Channel DC Motor Driver and FOC Control Board
Original case sheet

Overview and tech stack

Project type
PCB/PCBA & Product Integration
Motors
Multi-channel brushed DC motors, with FOC control for motors that need it
Board
Custom driver PCB with MCU module, screw terminals and stackable expansion headers
Testing
Functional, power, load and motor testing
Motor selection
Motor tested and chosen together with the driver

What we built

  • PCB design
  • Manufacturing
  • Functional testing
  • Power testing
  • Load testing
  • Motor testing and selection

What this tech stack can also build

  • Custom FOC motor controller board
  • Multi-channel DC motor driver for a robot or rover
  • Brushless motor (BLDC) driver board
  • Motor driver for a conveyor or small automation cell
  • Wheel motor controller for a mobile platform
  • Gimbal or camera slider motor control
  • Pump and fan motor driver board
  • Motorised furniture or actuator controller
  • Encoder-feedback DC motor control board
  • Educational motor control kit
  • Battery-powered motor driver with wireless control
  • Motor and driver selection for a new product

Commercial reference

Development time
30–45 days (reference)
Development fee
USD 6,000–14,000 depending on channel count and complexity (reference range)
Estimated BOM + assembly
about USD 40–90 per board at 100 units, depending on channel count (engineer estimate; motors not included)
Not included
Certification such as FCC/CE (quoted separately); shipping and import duties

Reference figures from our engineers for a similar build. Not a past invoice and not a fixed quote; a written quote follows a review of your files.

What to confirm before we quote

  • Channel count: how many motors one board must drive, and whether boards stack
  • Motor type: brushed DC with encoders, or motors that need FOC, and the motor model if chosen
  • Power input: battery pack or DC supply, voltage and the current each motor draws at load and at stall
  • Control interface: wireless MCU module, serial, CAN or other, and what commands it receives
  • Board and connectors: size limit, screw terminals or other connectors, and what the enclosure allows

Start a similar project

  1. Send what you have: sketches, a reference product, files or a written idea.
  2. We review it and list the gaps and open questions.
  3. You get a written scope and quote.

All builds →

Building something similar?

Get a free project review

Or book a 30-minute call