DIY intercom and group calling device

Client project: development $8,000, parts $150 per set, development time 40 days. A compact handheld intercom and group calling device built on the ESP32-S3. Each unit has a whip antenna, an OLED screen that shows the channel frequency and status, side buttons and a speaker grille, in a 3D-printed case offered in clear and colour versions. We did the PCB design and production, the custom RF design and tuning, the mechanical design of the enclosure and the embedded software for voice intercom and group calls, and took it from prototype to a small production batch.

  • Client type: Client (not named)
  • Units: 50 sets
  • Development fee: $8,000
  • Parts per unit: $150 per set
  • Development time: 40 days
  • Stage: Client project, delivered
Original case sheet: DIY intercom and group calling device
Original case sheet

Overview and tech stack

Project type
Custom Electronics & Embedded Systems
Main controller
ESP32-S3
Radio
Custom RF design and tuning for stable voice links
Functions
Voice intercom, group calling, OLED frequency and status display
Enclosure
Compact DIY-friendly handheld case, clear and colour variants

What we built

  • PCB design and production
  • Custom RF design and tuning
  • Mechanical design and enclosure
  • Embedded software for voice intercom and group calling
  • Prototype to small-batch production

What this tech stack can also build

  • Custom walkie-talkie for staff teams
  • Group calling device for events and venues
  • Restaurant and retail staff intercom
  • Warehouse and factory floor radio
  • Kids' walkie-talkie toy
  • Outdoor and hiking handheld radio
  • ESP32-S3 voice communication device
  • Branded promotional walkie-talkie
  • Push-to-talk handheld for security guards
  • Tour guide group audio device
  • Maker and education radio kit
  • Low-volume custom two-way radio enclosure

Project scope

Development time
40 days
Development fee
USD 8,000
BOM / unit cost
USD 150 per set
Quantity basis
50 sets in production

Client project. A quote for your build follows a review of your files.

What to confirm before we quote

  • Range and environment: how far units must reach, and indoors, outdoors or mixed
  • Radio band: the frequency you want and the countries you will sell in
  • Group calling: how many units per group and how channels are chosen
  • Display and controls: what the OLED shows, button layout and speaker or headset use
  • Case and battery: clear or colour 3D-printed case, run time and charging method

Start a similar project

  1. Send what you have: sketches, a reference product, files or a written idea.
  2. We review it and list the gaps and open questions.
  3. You get a written scope and quote.

All builds →

Building something similar?

Get a free project review

Or book a 30-minute call