Custom development board design: MCU, Linux, DSP and FPGA

Reference figures from Anvol's engineers for a similar build: development $4,000–8,000, estimated parts about $30–60 per unit at 100 units. Development boards designed around your chip and your interfaces, at three levels. MCU boards on STM32, ESP32, MSP or NXP parts; Linux boards on Rockchip RK3588 or RK3572 with 6–8 layer PCBs; and custom DSP and FPGA platforms. Each job covers the board design, schematic and PCB layout, board-level example code, detailed testing and two prototype boards. Orders start from 1 unit, and the same design can go on to volume production.

  • Client type: Not published
  • Units: 2 prototypes per board
  • Development fee: $4,000–8,000
  • Parts per unit (estimate): about $30–60 per unit at 100 units
  • Stage: Built by our engineers; figures are a reference range for similar builds
Original case sheet: Custom development board design: MCU, Linux, DSP and FPGA
Original case sheet

Overview and tech stack

Project type
PCB/PCBA & Product Integration
MCU boards
STM32, ESP32, MSP, NXP
Linux boards
RK3588, RK3572; 6–8 layer PCB
DSP / FPGA
Custom DSP and FPGA platforms
Delivered with
Schematic and PCB, board-level example code, detailed testing, 2 prototypes

What we built

  • Development board design
  • Schematic and PCB design (6–8 layers for Linux boards)
  • Board-level example code
  • Detailed testing
  • Prototype build (2 boards)

What this tech stack can also build

  • Custom STM32 development board
  • Custom ESP32 board for a product
  • RK3588 carrier board or single-board computer
  • Custom Linux SBC for an edge AI device
  • FPGA board for signal processing or data acquisition
  • DSP board for audio or motor control
  • Industrial controller board with many I/O terminals
  • Evaluation board for your own chip or module
  • Teaching and lab development board
  • 6–8 layer high-speed PCB design (DDR, Ethernet, USB 3)
  • Board bring-up with example code
  • Small-batch development boards from 1 unit

Commercial reference

Development time
3–8 weeks depending on the board (reference)
Development fee
USD 4,000–8,000 for an MCU development board (reference range)
Estimated BOM + assembly
about USD 30–60 per MCU board at 100 units (engineer estimate)
about USD 250–400 per RK3588 Linux board at 100 units (engineer estimate)
MCU board (STM32 / ESP32 / MSP / NXP)
USD 4,000–8,000, about 3 weeks (reference)
Linux board (RK3588 / RK3572, 6–8 layers)
USD 12,000–38,000, about 8 weeks (reference)
DSP / FPGA board
USD 22,000–56,000 (reference)
Minimum order
From 1 unit; volume production supported
Included
2 prototypes; Board-level example code; Detailed testing
Not included
Certification such as FCC/CE (quoted separately); shipping and import duties

Reference figures from our engineers for a similar build. Not a past invoice and not a fixed quote; a written quote follows a review of your files.

What to confirm before we quote

  • Platform level: MCU board, Linux board or DSP and FPGA board
  • Chip: the exact part, such as STM32, ESP32, MSP, NXP, RK3588 or RK3572, or open to our advice
  • Interfaces: which ports, sensors, displays, networking and expansion headers you need
  • Memory and storage: RAM, flash or eMMC, and any boot media
  • Software deliverables: which example code and tests you expect, and your operating system or toolchain

Start a similar project

  1. Send what you have: sketches, a reference product, files or a written idea.
  2. We review it and list the gaps and open questions.
  3. You get a written scope and quote.
Original case sheet: Custom development board design: MCU, Linux, DSP and FPGA
Original case sheet: Custom development board design: MCU, Linux, DSP and FPGA

All builds →

Building something similar?

Get a free project review

Or book a 30-minute call