What we can make, and where each step happens.

Anvol runs your project; each step goes to our Shenzhen bench, a partner factory or a workshop sourced for the job, and each capability below says which. Whoever makes it, Anvol approves the first article and every batch.

Fast enclosure and structure prototypes

3D-printed desk companion from one of our builds, held in front of a monitor

FDM 3D printing: Enclosures, brackets and fixtures to check size, fit, feel and mounting. Our bench; in Los Angeles see 3D printing.
SLA resin printing: Finer detail and smoother surfaces for looks models and small parts. Sourced per project.
CNC enclosures and metal parts: Machined housings, plates and brackets in aluminium or plastic. Partner factory.
Laser-cut panels: Acrylic or sheet front panels and covers. Sourced per project.
Send us: STEP or STL, or a sketch with the key dimensions.

Finishing and branding

UV colour printing: Logos, artwork and panel markings printed onto enclosures, and colour variants within a small batch. Sourced per project.
Laser marking: Permanent one-colour marks on metal or plastic: serial numbers, QR codes, part numbers. Sourced per project.
Films, labels and stickers: Membrane overlays, rating labels and packaging labels. Sourced per project.
Before a run: We print or mark a sample on your actual enclosure material first and check adhesion and wear on it.
Send us: Vector artwork (SVG, AI or PDF) and the part or its CAD.

Electronics and wiring

An engineer soldering parts onto a circuit board at our bench

PCB and PCBA: Schematic and layout on Our bench; board fabrication and SMT at a Partner factory. See PCB / PCBA & sourcing.
Component sourcing: Every part bought and checked by our team, including hard-to-find chips. Our bench.
Cable harnesses and connectors: Cut, stripped, crimped and tested cables. Sourced per project.
Hand soldering and rework: Prototype boards, modifications and repairs. Our bench.

Assembly and device setup

Final assembly line with workers and cartons

Mechanical assembly: Heat-set inserts, gluing and bonding, screws, display and cable fitting. Prototypes on Our bench; batches on a Partner factory line.
Firmware and provisioning: Firmware, serial numbers, device IDs and per-customer settings written to each unit, recorded per serial number. Our bench.
Send us: Your boards, enclosures and cables, or let us source them. See pilot & small batch.

Testing and delivery

First-article inspection tester next to a panel of boards

Incoming inspection: Boards and parts checked when they arrive.
First article: One unit built and checked against the approved prototype before the batch starts.
Functional test: Every unit tested before it is packed, with a test fixture when the quantity justifies one.
Defects and records: Each failure logged and closed; batch records and packing as in fulfillment.

Where each step happens

Boards, parts, machining, molds: PCB, SMT, part buying, CNC and molding go to Shenzhen partner factories at every stage: the supply chain, process experience and batch economics are there.
Parts that change every few days: Printed enclosures, panels, labels and fixtures are made close to whoever holds the prototype and decides: our Shenzhen bench, or a workshop near you when that beats shipping every revision.
Steps near the market: Regional firmware settings, serial numbers, final labels and packaging happen wherever final assembly happens.
Steps done on both sides: Wherever a unit is built or changed, it is tested again: first-article fit, board test and the final functional test.
As the batch grows: The larger and more stable the batch, the more it pays to build in one place; the more often the design changes, the more it pays to make the changing parts close to you. We compare landed cost, lead time, labour and duties for each batch instead of assuming.
Who signs off: One Anvol project lead approves the first article and releases each batch. You accept each batch. Details in quality and responsibility.
Factory names: You contract with Anvol, Inc., and Anvol answers for the factories' work, so we don't publish their names. You get the test results and batch records for your units.

Send what you have, even if it is only a sketch.

Review my project

Or WhatsApp Zisheng, our engineering lead: +86 185 3620 3904 · Book a 30-minute call