Engineering network.
Anvol organizes engineers across electronics, firmware, mechanical design, robotics, AI and manufacturing around each project, from a focused PCB task to a complete device and its production run. These are the engineers who work on Anvol projects. Projects listed under a person are their own work, including work for past employers; those companies are not Anvol clients.
11 engineers across 6 areas.
Zisheng Li
Engineering lead
Embedded systems. 20+ hardware products built, including the logic analyzer, tracked robot and line-following car in our cases. Named inventor on 8 granted patents.
Skills: STM32, ESP32, FreeRTOS, MicroPython, Edge AI vision
Projects: Camera-based pig health monitoring on Jetson Nano, EMG-controlled robot arm, Underwater robot on FreeRTOS, Sound-source localisation array
Ruili Xin
Operations lead
Embedded systems, maker education and digital fabrication. Fab Academy 2026, where she designed and built Maker Assistant, an ESP32 desk device that shows an AI coding agent's status over BLE. Runs teacher training and course building.
Skills: ESP32, STM32, MicroPython, BLE / MQTT, 3D printing, PCB milling
Projects: Maker Assistant desk notifier, Fab Academy 2026 coursework, Teacher training courses
Lanbo Mu
Mechanical and product engineer
Led a powered hip exoskeleton from concept to DVT: 30 units delivered, plus three rental-kiosk systems on trial at three scenic sites. Designed ultra-low-power sensors for power-grid monitoring, 35 nA on standby. ROBOCON national second prize as team captain.
Skills: SolidWorks, Altium Designer, CNC, 3D printing, PMP
Projects: Powered hip exoskeleton, Low-power power-grid sensors, ROBOCON competition robots
Shujie Li
Embedded and power electronics engineer
Embedded control and power electronics. Designs 1 kW-class power supplies, three-phase inverters and DSP control boards built around the TMS320F28335. Provincial award in a national electronic design contest.
Skills: TI C2000 DSP, STM32, 8051, Altium Designer, JLC EDA
Projects: 150 V three-phase inverter, 100 V totem-pole PFC stage, TMS320F28335 control board, Power-bank status display board
Biao Tang
Senior electronics engineer
19 years in electronics hardware. Since 2018, senior electronics engineer for automotive pedals, position sensors and actuators: schematics, PCB layout, BOM costing, DFMEA, reliability and EMC testing. Before that, LCD TV and display power-supply design at Wistron and other manufacturers.
Skills: BLDC / PMSM motor control, Automotive EMC, Hall and inductive sensors, Flyback power supplies, DFMEA
Projects: Inductive motor-position sensor, BDC and BLDC motor drive hardware, Automotive EMC fixes, LCD TV main boards
Yilan Tingfeng
Structural engineer
Structural engineer for consumer AI cameras, 2023 to 2026. Led manufacturing of the OBSBOT Meet 2 4K webcam and worked on mass production of the OBSBOT Tail Air PTZ camera. Designed a foldable screen-mounted conference camera and ran 10+ stacked-module iterations with suppliers.
Skills: Consumer camera structures, Folding mechanisms, Prototyping, BOM, Supplier DFM
Projects: OBSBOT Meet 2, OBSBOT Tail Air, Foldable conference camera, Environmental test rig
Ya Guo
Drone and robot-vehicle engineer
Builds research-grade ROS drones and SLAM robot cars at Haique Technology in Hangzhou: PX4 flight control, Jetson Orin Nano, MID360 lidar and RealSense depth camera, shipped ready to fly with open-source code. Used by 200+ universities and companies.
Skills: PX4, ROS, Jetson Orin Nano, Lidar SLAM, YOLO / TensorRT
Projects: ROS research drone with lidar SLAM, Carbon-fibre ROS SLAM car, Aluminium mid-size ROS SLAM car
Zhao
Tracked robot chassis engineer
Designs and builds tracked robot chassis: suspension, drive train, motor and servo matching, control tuning and remote-control integration. Custom bases for outdoor inspection, research, demos and light transport, from one prototype to small batches, typically in two to three weeks.
Skills: Track and suspension design, Servo and motor matching, Motor control tuning, Remote-control protocols
Projects: Rubber-track robot chassis, Outdoor inspection platform, Robot-arm and sensor mounts
Yansong Zhao
Embedded firmware engineer
Firmware and board bring-up on ESP32 and STM32: sensor and display drivers, FreeRTOS, PCB layout. Wrote an ESP-NOW TDMA networking component published on Espressif's official component registry. Team national second prize, 2025 China Undergraduate Electronic Design Contest. IoT engineering undergraduate, class of 2027.
Skills: ESP32 / ESP-IDF, STM32 HAL, FreeRTOS, LVGL, MIPI-DSI displays, ROS 2
Projects: ESP-NOW TDMA networking component, Multi-node wearable motion tracker on ESP32-S3, 10.1-inch MIPI-DSI display on ESP32-P4, TI MSPM0 driver library
Weiying Yang
Hardware engineer
Hardware engineer, 2023 to 2024: schematics and PCB layout, prototype bring-up and system integration, power and signal-chain debugging, plus test specifications, process documentation and hardware BOMs. Degree in communications engineering.
Skills: Schematics and PCB layout, Prototype bring-up, System integration, Test specifications, BOM and process documents
Chris Wu
Founder, Los Angeles
Repeat hardware founder. His previous company reached $300K ARR.
No engineer matches. Clear the search or pick another area.
Send what you have, even if it is only a sketch.
Get a free project reviewEngineer looking for project work? Join as an engineer